Setup Instructions

Example 4) A system using Dante
MTX Setup Manual
87
13.
Specify the number of units that will be connected in your MTX system, and click [Next>].
In the “YDIF Connected” area, specify 1 each as the number of MTX5-D and XMV4280 units; in the “Dante Con-
nected” area, specify 1 as the number of XMV4280-D devices.
14.
Specify the UNIT ID of each device, and click [Next>].
Unless you have specific reasons for doing so, use the UNIT ID that is assigned.