Owner's Manual

MTX3 Owner’s Manual
8
Introducing the MTX3
• A signal processor suitable for small or mid-sized
installed systems
The MTX3 is a signal processor suitable for small or mid-
sized systems such as retail establishments or banquet halls. In
addition to a 26 ch. x 8 ch. matrix mixer, it provides 3-band
parametric EQ, compressor/gate, auto gain control, eight pri-
ority duckers, and four feedback suppressors. For the output
stages, it provides numerous high-performance high-quality
processors, such as 4-band parametric EQ, delay, and speaker
processor.
• Newly-developed “YDIF” digital audio transmis-
sion format
“YDIF” is a digital audio transmission format that uses Ether-
net cable to send and receive up to 16 channels of audio and
word clock. You can use Ethernet cables up to 30 meters long
to easily make connections between devices.
• Versatile input/output and SD memory card slot
In addition to eight high-quality monaural mic/line inputs and
two stereo line inputs, digital input/output via “YDIF” can
allow up to 16 channels of input. An SD memory card slot for
playback is also provided; allowing MP3/WAV audio files
saved on the SD memory card to be played back. In addition to
eight channels of analog monaural output, a maximum of 16
channels of digital audio can be output via a “YDIF” connec-
tion.
• Support for external controls
By connecting a “DCP” series dedicated wall-mounted control
panel to the [DCP] connector, you can easily control the vol-
ume of multiple zones or switch presets. Daisy-chain connec-
tion via Ethernet cable allows up to eight “DCP” series control
panels to be connected. The total cable length from the MTX3
to the farthest control panel can be up to 200 meters, and
power is also supplied, allowing you to place the control panel
in the ideal location for the room. A NETWORK connector
and [GPI] connector are also provided for controlling the unit
from an AMX/Crestron or other touch panel device.
• Two built-in effect processors
Two effect processors are built-in, and can be easily used in a
party room or banquet hall. You can easily obtain effects such
as reverb or karaoke echo without needing to add dedicated
effect processors.
• Dedicated “MTX-MRX Editor” application soft-
ware for designing the entire system
“MTX-MRX Editor” is application software for editing the
parameters of the MTX3. Using operating screens that reflect
the workflow of designing the installation, this software
makes it easy to design a system and make (or adjust) settings.
A speaker library of Yamaha-manufactured speakers is also
built-in, making it easy to choose settings that will maximize
the performance of your speakers.
• iPhone app support
A dedicated iPhone app makes it easy to control the volume
and manage presets in the same way as when using the dedi-
cated wall-mounted control panel. You can use your iPhone/
iPod touch to easily control the sound system of a retail loca-
tion or a banquet hall.
MTX-MRX Editor is software for the Windows operating sys-
tem that allows unified construction and control of systems that
use the MTX series.
MTX-MRX Editor and the MTX-MRX Editor User Guide can
be downloaded from the following website.
http://download.yamaha.com/
For details on installing MTX-MRX Editor and connecting the
MTX3 to your computer, refer to the “MTX Setup Manual.”
The MTX-MRX Editor User Guide is an electronic file in PDF
format. You can read this book on a computer. Use Adobe®
Reader® to read this book on screen, search for words very
quickly, print specific pages, or click links to display sections of
special interest. The ability to search for words, or to follow
links directly to relevant sections in the document, are helpful
attributes of this electronic file format. We encourage you to
take advantage of these benefits.
You can download the latest Adobe Reader application from the
website listed below.
http://www.adobe.com/
Features About MTX-MRX Editor
Using the PDF manual