manual

How the settings in each dialog box relate to the “YDIF” screen Chapter 4. System screen
MTX Editor User’s Manual
104
How the settings in each dialog box relate to the “YDIF”
screen
About YDIF
When connected via YDIF, the XMV will send the audio signals without change to the
EXi8 or the MTX. If the input from the EXi8 has not been specified in the “YDIF In
Patch” dialog box, the audio signals that have passed through the XMV/EXo8 will
return to the MTX.
In this case, make settings in the “Input Patch” dialog box so that YDIF is not assigned
to input channels; this prevents the returned audio signals from being mixed.
8
YDIF
OUTPUT
PATCH
From INPUT CHANNEL POST ON 1-8
From THRU 1-16
From ZONE OUT 1-8
From STEREO INPUT CHANNEL POST ON 1L-3R
16
8
*DISTRIBUTION MODE only
*CASCADE MODE only
YDIF OUT
YDIF OUT
YDIF MODE
CASCADE MODE
or DISTRIBUTION MODE
8
6
8
16
YDIF
OUT
YDIF2
YDIF1
#03 EXi8
CH1
OUT
OUT
OUT
OUT
OUT
OUT OUT
IN
IN
IN
IN
IN
IN IN
#04 EXi8
#01 MTX3
#02 MTX3
#30 XMV
#31 XMV
#03 EXi8
OUT
OUT
OUT
OUT
OUT
IN
IN
IN
IN
IN
#04 EXi8
#01 MTX3
#02 MTX3
#30 XMV
#31 XMV
OUT8
CH A&B
MTX3 ID=02
MTX3 ID=01
XMV4280 ID=31
XMV4280 ID=30
EXi8 ID=03
EXi8 ID=04
Network
Swich
No output No output
No output
No output
Through
Through
Through
Through
Through
Through
Through
Through
Through
Through
CH C
“YDIF Out Patch” dialog box
“Channel Select” dialog box
“YDIF In Patch” dialog box
YDIF signal flow with the settings shown above