manual

Online Chapter 5. Online and Synchronization
MTX Editor User’s Manual
120
❑ “Go online – From devices” dialog box
The settings (configuration and parameters) of the MTX are loaded into MTX Editor. In order to
execute this, the MTX whose settings are to be obtained must have been online with MTX Editor
using the To Device setting.
In this dialog box, you can specify how multiple MTX systems that are found will be assigned to
SYSTEM #1 through #4.
• [SYSTEM NAME] list
The system name will be displayed if you use the [All Clear] button or the [Clear]
button to clear an MTX system that was found.
• [All Clear] button
Moves all MTX systems that are assigned as SYSTEM #1 through #4 to the [SYSTEM
NAME] list.
•[Clear]/[Add] toggle buttons
If you click the [Clear] button, the specified MTX system will be moved to the
[SYSTEM NAME] list. If you click the [Add] button, the MTX system selected in
the [SYSTEM NAME] will be assigned.
The name of the assigned MTX system is shown at the right of the button.
• [Online] button
When you click this, the settings of the MTX systems that are assigned as SYSTEM
#1 through SYSTEM #4 will start being loaded. When loading is completed, you will
be online.
•[Cancel] button
Click this to close the dialog box without synchronizing.