manual
Recall Filter setting screen Chapter 6. Presets
MTX Editor User’s Manual
135
• [INPUT]/[LEVEL] buttons
If the [INPUT] button is on, the following input channel settings will be recalled.
Input channels: Phase, HPF, Digital Gain, PEQ, COMP, GATE, AGC,
FBS, Insert on/off (*)
Stereo input channels: Digital Gain, PEQ, AGC, COMP
(*) Insert on/off is only for the MTX5-D.
If the [LEVEL] button is on, the input channel level and on/off (mute) settings will
be recalled.
These can be specified individually for each channel.
In the “MTX Configuration” dialog box, if [INPUT PORT SETUP] is changed from
“MONO x2” to “STEREO,” the settings of the [INPUT]/[LEVEL] buttons will follow the
“L” side.
• [Fx1]/[Fx2] buttons
If these buttons are on, the effect type and the following settings will be recalled.
• Send level from the input channel to the effect bus, send on/off
• Effect return level, on/off (mute)
•Effect return name
• [DCA] button (INPUT side)
If this is on, the following settings will be recalled.
• The input channel’s assignment to DCA or mute group
• Master level of the DCA group
• Master mute of the mute group
• [MATRIX SEND] button
If this is on, the following settings will be recalled.
• Send level from the input channel to the matrix bus, send on/off, and stereo channel
pan
• Send level from effect return to the matrix bus, send on/off, and stereo channel pan
• [ANC1 SEND]/[ANC2 SEND] buttons
If these buttons are on, the send level from the input channel to the ANC bus and
the send on/off status will be recalled.
NOTE