manual

List of settings in “Settings” dialog boxes Appendix
MTX Editor User’s Manual
179
List of settings in “Settings” dialog boxes
This section explains the settings in the following “Settings” dialog boxes.
•Switch
•Knob/Slider
•GPI Input
• GPI Output
■ Switch
Settings for the switches of the DCP or Wireless DCP are explained here.
● If [FUNCTION] is [No Assign]
Use this setting if you don’t want the switch of the controller to change any setting. This
is unavailable for [MTX] and for [PARAMETER 1/2].
● If [FUNCTION] is [ON]
Controls the on/off setting of the parameter.
Select one of the following parameter types, and then make the appropriate setting.
•Input Ch ON
•Fx RTN ON
• ZONE Out ON
•Output Ch ON
• Input Ch Mute Group
•ZONE Out Mute Group
❍ [MTX]
Selects the MTX that you want to change. These are shown in order of UNIT ID and
model name.
❍ [PARAMETER1]
Specify the channel that will control the on/off setting of the parameter.
Channel list