manual

“Output Patch” dialog box Chapter 4. System screen

MTX Editor User’s Manual

❑ “Output Patch” dialog box

Here you can choose how the output channels will be assigned to connectors or channels.

You can select multiple output connectors (except for Far-end Voice, To Far-end, and Near-end

Mic.).

• [Output CH] box

Selects the output channel.

•OUTPUT

These are the MTX’s [OUTPUT] connectors.

•YDIF

There are the channels that the MTX will output as YDIF.

They are available only in Distribution mode.

• DANTE (MTX5-D only)

This is the MTX5-D’s [Dante] connector.

•SLOT (MTX5-D only)

This is the MTX5-D’s [SLOT].

• INPUT CHANNEL (only for Far-end Voice, To Far-end, and Near-end Mic.)

These are the input channels of the MTX5-D.

• STEREO INPUT CHANNEL (only for Far-end Voice, To Far-end, and Near-end

Mic.)

These are the stereo input channels of the MTX5-D.

• DIRECT INPUT CHANNEL (only for Far-end Voice, To Far-end, and Near-end

Mic.)

These are the input channels of the MTX5-D.

• [Close] button

Closes the “Output Patch” dialog box.