User Guide

12
MIDI
POWER
DC IN
TO HOST
OUT IN
ON OFF
HOST SELECT
MIDI Mac PC-2 PC-1
Setting Up the MU10 in Your Music System
Whatever your system, you should follow the basic instructions in this section when
setting up your MU10. Use the example illustrations as a general guide when making
the connections with your own system.
Setting Up Your MU10
Power Supply
■ Using a Power Adaptor
Connect one end of the power adaptor
(optional Yamaha PA-3B, PA-1207, or
equivalent) to the DC IN jack on the
rear panel, and the other end to a
suitable electrical outlet.
Your MU10 will run either from an optional AC adaptor or batteries. When-
ever possible, you should use the AC adaptor, since the MU10 runs only for
a short time on battery power (approximately two hours and twenty minutes
on alkaline batteries).
■ NOTE
●
Before making any connections, make
sure that all equipment to be con-
nected is turned off.
■ CAUTION
●
Do not attempt to use an AC adaptor
other than the PA-3B, PA-1207, or
equivalent. The use of an incompatible
adaptor may result in irreparable
damage to the MU10, and even pose a
serious shock hazard. (The recom-
mended power adaptor may vary,
depending on your location. Please
consult your nearest Yamaha dealer for
details.)
●
Be sure to disconnect the power adaptor
from the outlet when the MU10 is not in
use for an extended period of time or
during electrical storms.
DC IN
Power
Adaptor