User Guide

126 MU128 Multi Mode
Drum Setup Controls
The Drum Setup controls allow you to make a wide variety of settings
for the drum sounds in a Drum Part. These settings include Pitch con-
trols, Level, Pan, effect send, filter controls and EG (Envelope Genera-
tor), among others. Moreover, these parameters can be set to completely
independent values for each of the drum sounds in a Part.
The Drum Setup controls can only be called up by first selecting a Part to
which a Drum Part is assigned. (For basic information on using the Drum
setup controls, see page 65.)
Path: [EDIT] button → “DRUM”
Drum Setup Controls ______________________________________
Pitch Parameters ....................................................127
●
Pitch Coarse
●
Pitch Fine
●
Velocity Pitch Sensitivity (VelPchSens)
Level......................................................................127
●
Level
Pan ........................................................................127
●
Pan
Effect Send Parameters ...........................................127
●
Reverb Send (Rev Send)
●
Chorus Send (Cho Send)
●
Variation Send (Var Send)
Filter Parameters .................................................... 128
●
LPF Cutoff Frequency (LPF Cutoff)
●
LPF Resonance (LPF Reso)
●
Velocity LPF Cutoff Sensitivity (VelLPFSens)
●
HPF Cutoff Frequency (HPF Cutoff)
EQ Parameters .......................................................129
●
EQ Low Frequency (Low Freq)
●
EQ Low Gain
●
EQ High Frequency (High Freq)
●
EQ High Gain
EG Parameters .......................................................129
●
EG Attack
●
EG Decay 1
●
EG Decay 2
Multi Edit Mode