User Guide

MU128 MIDI 37
2.2.1.7 A/D Part bulk dump
This message sets the A/D PART block (refer to
tables <1 - 1>, <1 - 9>).
2.2.1.8 XG System bulk dump
This message sets the A/D SYSTEM block (refer
to tables <1 -1>, <1 - 10>).
2.2.1.9 A/D System bulk dump
This message sets the DRUMS SETUP block
(refer to tables <1 - 1>, <1 - 11>).
2.2.2 MU128 native bulk dump (1)
This message modifies parameters unique to the MU128.
Unlike parameter change messages, a single message will
modify multiple parameters.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0000nnnn 0NH N:Device Number
01001001 49H Model ID
0sssssss SSH ByteCountMSB
0ttttttt TTH ByteCountLSB
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0vvvvvvv VVH Data
: :
0kkkkkkk KKH Check-sum
11110111 F7H End of Exclusive
Details are the same as for 2.2.1 XG Bulk Dump. However,
refer to table 2-n for the address, byte count, and block.
2.2.2.1 System bulk dump
This message sets the SYSTEM block (refer to
tables <2 - 1>, <2 - 2>).
2.2.2.2 MU80, MU50 Internal
Performance bulk dump
This message is in MU80 / MU50 data format.
It sets the INTERNAL PERFORMANCE block
(refer to tables <2 - 1>, <2 - 4>).
2.2.3 MU128 native bulk dump (2)
This message sets parameters unique to the MU128. Unlike
parameter change messages, a single message can modify
multiple parameters.
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0000nnnn 0NH N:Device Number
01011001 59H Model ID
0sssssss SSH ByteCountMSB
0ttttttt TTH ByteCountLSB
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
0vvvvvvv VVH Data
: :
0kkkkkkk KKH Check-sum
11110111 F7H End of Exclusive
Details are the same as for 2.2.1 XG Bulk Dump. However,
refer to table 3-n for address, byte count, and block.
2.2.3.1 Internal Performance bulk
dump
This message sets the INTERNAL PERFORMANCE
block (refer to tables <3 - 1>, <3 - 3>).
2.3 Parameter request
This message requests transmission of a parameter value.
The output is transmitted in the Parameter Change message format
(refer to 2.1.3, 2.1.4, and 2.1.5).
2.3.1 XG parameter request
This message requests transmission of XG parameter
settings.
Settings are transmitted in the format of an XG parameter
change (refer to 2.1.3).
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0011nnnn 3NH N:device Number
01001100 4CH Model ID
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
11110111 F7H End of Exclusive
2.3.2 MU128 native parameter request (1)
This message requests transmission of a parameter value
unique to the MU128.
The output is transmitted in the format of a MU128 native
parameter change (refer to 2.1.4).
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0011nnnn 3NH N:Device Number
01001001 49H Model ID
0ggggggg GGH Address High
0mmmmmmm MMH Address Mid
0lllllll LLH Address Low
11110111 F7H End of Exclusive
2.3.3 MU128 native parameter request (2)
This message requests the transmission of a parameter value
unique to the MU128.
The output format is the same as for a MU128 native
parameter change (refer to 2.1.5).
11110000 F0H Exclusive status
01000011 43H YAMAHA ID
0011nnnn 3NH N:Device Number
01011001 59H Model ID
0ggggggg GGH Address High
MIDI data format