User Manual
5
MU80 Effect Parameter List
AC1
Parameter Range Value
Table No.
Control
11 Stage 4,6,8, 4-8
12 Diffusion Mono/Stereo 0-1
13
14
15
16
DISTORTION
OVERDRIVE
1 Drive 0~127 0-127
• This determines the intensity of the Distortion effect.
The higher the value, the greater the distortion.
2 EQ Low Frequency 32Hz~2.0kHz 4-40 Table#3
3 EQ Low Gain -12~+12dB 52-76
4 LPF Cutoff 1.0k~Thru 34-60
5 Output Level 0~127 0-127 This determines the level of the Distortion effect.
Use this parameter together with the Dry/Wet Balance parameter below to obtain
the desired overall sound.
6
7 EQ Mid Frequency 100Hz~10.0kHz 14-54
8 EQ Mid Gain -12~+12dB 52-76
9 EQ Mid Width 1.0~12.0 10-120
10 Dry/Wet D63>W ~ D=W ~ D<W63 1-127
11
12
13
14
15
16
GUITAR AMP SIMULATOR
1 Drive 0~127 0-127
• See above.
2 AMP Type Off,Stack,Combo,Tube 0-3 Type of amplifier simulated: Stack (huge amp/speaker setup), Combo (compact
amp cabinet), Tube (warm tube amplifier sound).
3 LPF Cutoff 1.0k~Thru 34-60
4 Output Level 0~127 0-127 See above.
5
6
7
8
9
10 Dry/Wet D63>W ~ D=W ~ D<W63 1-127
11
12
13
14
15
16
MONO EQ(3BAND)
1 EQ Low Gain -12~+12dB 52-76 Amount of boost or cut of low frequencies.
2 EQ Mid Frequency 100Hz~10.0kHz 14-54 Table#3 Central frequency for mid-range adjustment.
3 EQ Mid Gain -12~+12dB 52-76 Amount of boost or cut of mid-range frequencies.
4 EQ Mid Width 1.0~12.0 10-120 Band width of mid-range frequencies.
Higher values result in a narrower range of frequencies.
5 EQ High Gain -12~+12dB 52-76 Amount of boost or cut of high frequencies.
6 EQ Low Frequency 32Hz~2.0kHz 4-40 Table#3
7 EQ High Frequency 500Hz~16.0kHz 28-58 Table#3
8
9
10
11
12
13
14
15
16
STEREO EQ(2BAND)
1 EQ Low Frequency 32Hz~2.0kHz 4-40 Table#3 Central frequency for low adjustment.
2 EQ Low Gain -12~+12dB 52-76 Amount of boost or cut of low frequencies.
3 EQ High Frequency 500Hz~16.0kHz 28-58 Table#3 Central frequency for high adjustment.
4 EQ High Gain -12~+12dB 52-76 Amount of boost or cut of high frequencies.
5
6
7
8
9
10
11 EQ Mid Frequency 100Hz~10.0kHz 14-54 Table#3
12 EQ Mid Gain -12~+12dB 52-76
13 EQ Mid Width 1.0~12.0 10-120
14
15
16
AUTO WAH
1 LFO Frequency 0.08~39.7Hz 0-127 Table#1 Speed of auto wah effect.
2 LFO Depth 0~127 0-127 Depth of auto wah effect.
3 Cutoff Frequency Offset 0~127 0-127
• Central frequency for the auto wah effect.
4 Resonance 1.0~12.0 10-120 Amount of emphasis of the cutoff frequency.
5
6 EQ Low Frequency 32Hz~2.0kHz 4-40 Table#3
7 EQ Low Gain -12~+12dB 52-76
8 EQ High Frequency 500Hz~16.0kHz 28-58 Table#3
9 EQ High Gain -12~+12dB 52-76
10 Dry/Wet D63>W ~ D=W ~ D<W63 1-127
11Drive 0~127 0-127
12
13
14
15
16
PITCH CHANGE
1 Pitch -24~+24 40-88 Coarse pitch change setting. (Affects both left and right channels.)
2 Initial Delay 0~127 0-127 Table#7 Length of time before onset of pitch change.
3 Fine 1 -50~+50 14-114 Fine pitch adjustment for the left channel sound.
4 Fine 2 -50~+50 14-114 Fine pitch adjustment for the right channel sound.