Tone Generator Owner's Manual

MULTI MODE

HINT

Velocity Limit can be used to set up velocity splits. A velocity split allows you to have one Part’s

Voice sound when you play the connected keyboard strongly, and a different Voice sound when

you play softly. Set two Parts to the same MIDI channel (see page 37), but give them different Veloc-

ity Limit settings so that one or the other sounds depending on how strongly you play the keyboard.

Velocity Limit Low (VelLimitLo)

Graphically shows Velocity Limit Low setting for each Part.

Selected Part and MIDI channel

Range: 1 … 127

Default: 1

This determines the lowest velocity value at which the Part’s Voice

will play. The higher the value, the harder the keyboard must be

played for the Voice to sound.

Velocity Limit High (VelLimitHi)

Graphically shows Velocity Limit High setting for each Part.

Selected Part and MIDI channel

Range: 1 … 127

Default: 127

This determines the highest velocity value at which the Part’s Voice

will play. The lower the value, the less strength needed (in playing

the keyboard) to get maximum volume.

sound

1 127

VelLimitLo VelLimitHi