User Guide

10
MU80 MIDI Data Format
1.2.19 Effect4 Depth ( Variation Effect Send Level )
Cntrl# Parameter Data Range
94 Effect4 Depth 0...127
(0...127) when Variation Connection = 1 (System)
Adjusts the variation effect send level. Not effective if “Variation Connection” is set to 0
(Insertion).
1.2.20 Data Increment / Decrement (for RPN)
Cntrl# Parameter Data Range
96 RPN Increment 0...127
97 RPN Decrement 0...127
The data byte has no meaning.
This message adds or subtracts 1 to/from the Pitchbend Sensitivity, Fine Tune, and Coarse
Tune MSBs. Note that the Increment (Decrement) message will not change a setting that has
already reached its maximum (minimum) value. Incrementation or decrementation of the
Fine Tune value never carries over to the Coarse Tune value.
1.2.21 NRPN (Nonregistered parameter number)
Cntrl# Parameter Data Range
98 RPN LSB 0...127
99 RPN MSB 0...127
If multipart parameter “Rcv NRPN” is OFF, the part ignores this message.
First send the NPRN MSB and LSB to select the control parameter, then set the value by
Data Entry.
The following NRPN values are supported.
NRPN Data entry
MSB LSB MSB Parameter Data Range
$01 $08 $mm Vibrato Rate
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $09 $mm Vibrato Depth
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $0A $mm Vibrato Delay
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $20 $mm Filter Cutoff Freq.
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $21 $mm Filter Resonance
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $63 $mm EG Attack Time
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $64 $mm EG Decay Time
mm : $00 - $40 - $7F (-64 - 0 - +63)
$01 $66 $mm EG Release Time
mm : $00 - $40 - $7F (-64 - 0 - +63)
$14 $rr $mm Drum Filter Cutoff Freq.
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$15 $rr $mm Drum Filter Resonance
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$16 $rr $mm Drum EG Attack Rate
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$17 $rr $mm Drum EG Decay Rate
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
(Effects both Decay 1 and Decay 2)
$18 $rr $mm Drum Instrument Pitch Coarse
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$19 $rr $mm Drum Instrument Pitch Fine
mm : $00 - $40 - $7F (-64 - 0 - +63)
rr : drum instrument note number
$1A $rr $mm Drum Instrument Level
mm : $00 - $7F (0 to Max)
rr : drum instrument note number
$1C $rr $mm Drum Instrument Panpot
mm : $00 - $40 - $7F (Random, L→C→R)
rr : drum instrument note number
$1D $rr $mm Drum Instrument Reverb Send Level
mm : $00 - $7F (0 to Max)
rr : drum instrument note number
$1E $rr $mm Drum Instrument Chorus Send Level
mm : $00 - $7F (0 to Max)
rr : drum instrument note number
$1F $rr $mm Drum Instrument Variation Send Level
mm : $00 - $7F (0 to Max)
rr : drum instrument note number
Note that LSB values 14H through 1FH (drum parameters) are effective only if the channel
is in drum mode and drum setup 1, 2, 3, or 4 is currently selected.
1.2.22 RPN (Registered parameter number)
Cntrl# Parameter Data Range
100 RPN LSB 0...127
101 RPN MSB 0...127
Default:7F 7FH
If multipart parameter “Rcv RPN” is OFF, the part ignores this message.
The following parameters are supported.
NRPN Data entry
MSB LSB MSB LSB Parameter Data Range
00H 00H mmH -- Pitchbend Sensitivity
mm: 00-18H (0-2 semitones)
Can be set up 2 octaves, in semitone units.
Default: 02H
LSB is ignored.
00H 01H mmH 11H Fine Tuning
mm:00H-40H-7FH(-64-0-+63)
00H 02H mmH -- Course Tuning
mm:28H - 40H - 18H(-24-+24 semitones)
LSB is ignored.
7FH 7FH -- -- RPN Null
Clears current RPN and NRPN number settings.
Does not change internal parameter settings.
1.2.23 Channel Mode Messages
The following Channel Mode messages are supported.
2nd byte 3rd byte
120 0 All Sound Off
121 0 Reset All Controllers
123 0 All Notes Off
124 0 Omni Off
125 0 Omni On
126 0 ~ 16 Mono
127 0 Poly
1.2.23.1 All Sound Off
Switches off all sound from the channel. Does not reset Note On and Hold On conditions
established by Channel Messages.
1.2.23.2 Reset All Controllers
Resets controllers as follows.
Controller Value
Pitchbend change +-0 (center)
Channel Pressure 0 (off)
Polyphonic Key Pressure 0 (off)
Modulation 0 (off)
Expression 127 (max)
Hold 0 (off)
Portamento 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
Portamento Control Resets portamento source note number
RPN Sets number to null. (Internal data re-
mains unchanged.)
NRPN Sets number to null. (Internal data re-
mains unchanged.)