User Manual

9
MU80 MIDI Data Format
1. Channel Messages
1.1 Key On and Key Off
Receivable note range: C2 to G8
Velocity range: 1 to 127 (Value accepted only at Note On)
If multipart parameter “Rcv NOTE MESSAGE” is OFF, the part ignores these messages.
Rhythm part will ignore Key Off if “Rcv NOTE OFF = OFF”.
Rhythm part will ignore Key On if “Rcv NOTE ON = OFF”.
1.2 Control Change
If multipart parameter “Rcv CONTROL CHANGE” is OFF, the part ignores these
messages.
1.2.1 Bank Select
Cntrl# Parameter Data Range
0 Bank Select MSB 0:Normal, 64:SFX, 126-127:Drum
32 Bank Select LSB 0...127
A new bank selection does not become effective until receipt of the next Program Change
message.
If “Sound Module Mode = C/M”, all Bank Selects are ignored.
1.2.2 Modulation
Cntrl# Parameter Data Range
1 Modulation 0...127
If multipart parameter “Rcv MODULATION” is OFF, the part ignores this message.
1.2.3 Portamento Time
Cntrl# Parameter Data Range
5 Portamento Time 0...127
Sets the pitch-change speed used when Portamento is ON. A value of 0 produces the shortest
portamento time; value 127 selects the longest time.
1.2.4 Data Entry
Cntrl# Parameter Data Range
6 Data Entry MSB 0...127
38 Data Entry LSB 0...127
Sets the value for the parameter specified by RPN/NRPN.
1.2.5 Main Volume
Cntrl# Parameter Data Range
7 Data Entry MSB 0...127
If multipart parameter “Rcv VOLUME” is OFF, the part ignores this message.
1.2.6 Pan
Cntrl# Parameter Data Range
10 Data Entry MSB 0...127
0 = left; 127 = right
If multipart parameter “Rcv PAN” is OFF, the part ignores this message.
1.2.7 Expression
Cntrl# Parameter Data Range
11 Data Entry MSB 0...127
If multipart parameter “Rcv EXPRESSION” is OFF, the part ignores this message.
1.2.8 Hold1
Cntrl# Parameter Data Range
64 Data Entry MSB 0...127
(0-63:off, 64-127:on)
If multipart parameter “Rcv HOLD1” is OFF, the part ignores this message.
1.2.9 Portamento
Cntrl# Parameter Data Range
65 Portamento 0...127
(0-63:off, 64-127:on)
If multipart parameter “Rcv PORTAMENTO” is OFF, the part ignores this message.
1.2.10 Sostenuto
Cntrl# Parameter Data Range
66 Sostenuto0...127
(0-63:off, 64-127:on)
If multipart parameter “Rcv SOSTENUTO” is OFF, the part ignores this message.
1.2.11 Soft Pedal
Cntrl# Parameter Data Range
67 Soft Pedal 0...127
(0-63:off, 64-127:on)
If multipart parameter “Rcv SOFT PEDAL” is OFF, the part ignores this message.
1.2.12 Harmonic Content
Cntrl# Parameter Data Range
71 Harmonic Content 0...127
(0:-64, 64:+0, 127:+63)
Applies adjustment to the resonance value set by the voice. This parameter specifies relative
change, with value 64 producing zero adjustment. As values get higher the sound becomes
increasingly eccentric. Note that for some voices the effective parameter range is narrower
than the legal parameter range.
1.2.13 Release Time
Cntrl# Parameter Data Range
72 Release Time 0...127
(0:-64, 64:+0, 127:+63)
Applies adjustment to the envelope release time set by the voice.
This parameter specifies relative change, with value 64 producing zero adjustment.
1.2.14 Attack Time
Cntrl# Parameter Data Range
73 Attack Time 0...127
(0:-64, 64:+0, 127:+63)
Applies adjustment to the envelope attack time set by the voice.
This parameter specifies relative change, with value 64 producing zero adjustment.
1.2.15 Brightness
Cntrl# Parameter Data Range
74 Brightness 0...127
(0:-64, 64:+0, 127:+63)
Applies adjustment to the cutoff frequency set by the voice. This parameter specifies
relative change, with value 64 producing zero adjustment. Lower voices produce a softer
sound. For some voices the effective parameter range is narrower than the legal parameter
range.
1.2.16 Portamento Control
Cntrl# Parameter Data Range
84 Portamento Control 0...127
Message should be sent with Note On already sounding. The data value sets the portamento
source key number.
The channel with change from the currently sounding pitch to the next received Note-
On key using Portamento Time of 0.
This message is effective even when “Rcv Portamento = OFF.”
1.2.17 Effect1 Depth ( Reverb Send Level )
Cntrl# Parameter Data Range
91 Effect1 Depth 0...127
Adjusts the reverb send level.
1.2.18 Effect3 Depth ( Chorus Send Level )
Cntrl# Parameter Data Range
93 Effect3 Depth 0...127
Adjusts the chorus send level.