User Manual

Table Of Contents

Useful features

Child lock function

This unit is equipped with a child lock function. When the child lock function is

enabled, some control panel operations are disabled to prevent unintended or

accidental operation.

This function is disabled by default. When the child lock function is enabled, only the

following functions can be operated via the control panel. Use the MusicCast

CONTROLLER app to operate other functions.

When the unit is in standby mode

• turn on the unit

• configure options (& p. 22)

When the unit is on

• set the unit to standby mode

• stop the alarm

1 Tap and hold and on the control panel simultaneously

for at least five seconds when the unit is in standby mode.

2 Tap and hold at least three seconds.

The AUX 1 and AUX 2 indicators will flash three times, and the child lock function

will be enabled.

To disable the child lock function, repeat steps

and

The AUX 1 and AUX 2 indicators will flash twice, and the child lock function will be

disabled.

Note

If no operations are performed for ten seconds or more after performing step

, the unit will

revert to standby mode without enabling/disabling the child lock function. Proceed from step

again to enable/disable the child lock function.

Enabling/disabling the child lock function