User Manual

17
Pair the unit with MusicCast-enabled devices
Using the unit as a surround speaker (MusicCast Surround function)
MusicCast Surround-enabled devices such as AV receivers or sound bars can be paired
with the unit to enjoy multi-channel audio.
When using this function, update the firmware for the unit and MusicCast
Surround-enabled devices to the latest versions (& p. 24 “Firmware updates”).
See documentation provided with external devices for information on firmware
updates.
1 Register the unit and a MusicCast Surround-enabled AV
receiver or sound bar with the same location on the
MusicCast CONTROLLER app (& p. 15 “Configuring a
MusicCast network”).
2 Follow the app’s on-screen instructions to complete the
settings.
Note
• The following functions and operations are not available when the unit is used as a surround
sound speaker.
– Favorites function
– Alarm function
– Volume adjustment
The volume is adjusted to match the volume level specified with the AV receiver or sound
bar.
– Option settings other than “Initialize the unit” (& p. 22) and “Enable/disable the child lock
function” (& p. 23).
• Two units can be used as the surround speakers. Position one unit at left and the other at right
of the listening position.
• If the alarm has been set, turn it off before configuring MusicCast Surround.
Surround speaker (unit)
Configure MusicCast Surround
on the AV receiver or sound bar
that will be paired with the unit.