User Manual

Wired network connections

To use a wired network connection, connect the unit to a router via

an STP network cable (category 5 or higher straight cable; sold

separately).

LAN

WAN

Internet

Network Attached Storage

(NAS)

Mobile device

Computer

Modem

Network cable

Router

NOTE

If network connections or settings are changed, use the MusicCast CONTROLLER

app to connect the unit to a network and register the unit as a MusicCast-enabled

device again (p.22).

Wireless network connections

Connect the unit to a wireless router (access point) to use a

network.

See the following for instructions on connecting to a wireless router

(access point).

• “Connecting with the MusicCast CONTROLLER app (registering

the unit as a MusicCast-enabled device)” (p.22)

• “Connecting to a network using the WAC function” (p.51)

Internet

Mobile device

Wireless router (access point)

Modem

The * indicator on the unit glows when the unit is connected to a

wireless network.

Glows

NOTE

If the unit and the wireless router (access point) are too far apart, the unit may not

connect to a wireless router (access point). In such case, place them close to each

other.