User Manual

Initializing the unit

Reset the settings of the unit to the factory presets.

Turn off the unit.

Touch and hold | and z/CONNECT on the unit

until all indicators flash.

Flash (initialized)

Connecting to a network using the WAC

function

When the unit is turned on for the first time after purchase, the *

indicator on the unit flashes slowly. While the * indicator is flashing,

network settings from your iOS device (an iPhone, etc.) can be

applied to the unit to connect the unit to a wireless network (WAC

function).

NOTE

The * indicator does not flash if the unit’s NETWORK jack is connected to a router

using a cable (wired connection).

Display Wi-Fi settings on the iOS device and

select the unit from “SETUP A NEW AIRPLAY

SPEAKER...”.

Name of the unit

When the following screen is displayed, select the

network (access point) to which the unit will be

connected.

Name of the selected network

Tap to connect to the selected

network

Name of the unit

NOTE

If the unit is connected to a network using the MusicCast CONTROLLER app,

network settings will be changed to those of the MusicCast CONTROLLER app.