User Manual

En 114
■ Balance Input Attenuator
Selects whether to activate the attenuator for the balance input (AUDIO 4) so that you
can avoid sound distortion when high-level signals are input.
Activate the attenuator when connecting an audio device which outputs signals of 3 V
(RMS) or higher to the AUDIO 4 (XLR balanced input) jacks (p.37).
Input source
AUDIO 4
Settings
■ Ultra Low Jitter PLL Mode
Enables/disables the jitter elimination function.
Input sources
AV 1–7, V-AUX, AUDIO 1–4 (available only when any audio digital input jack is assigned),
AirPlay, SERVER, NET RADIO, (network services), Bluetooth, USB
Settings
You can change the settings of the SCENE function (p.67) using the TV screen.
1
Press ON SCREEN.
2
Use the cursor keys to select “Scene” and press ENTER.
3
Use the cursor keys (e/r) to select a scene to be configured and
press the cursor key (q).
4
Use the cursor keys (q/w) to select an item and press ENTER.
Bypass Does not activate the attenuator for the balance input.
ATT.(-6dB)
Activates the attenuator for the balance input to reduce the signal level
(-6dB).
Off Disables the jitter elimination function.
Level 1
, Level 2,
Level 3
Enables the jitter elimination function.
The higher level enhances the DAC accuracy, but may cause audio
interruptions on some playback devices depending on the audio clock
conditions. In this case, select lower level.
Configuring the SCENE function (Scene menu)