User Manual

En 122
Sound
Lipsync
Delay Enable Enables/disables the Lipsync adjustment for each input source. 128
Auto/Manual Select Selects the method to adjust the delay between video and audio output. 128
Adjustment Adjusts the delay between video and audio output manually. 129
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback. 129
Max Volume Sets the maximum volume to prevent excessive loudness. 129
Initial Volume Sets the initial volume for when this receiver is turned on. 129
Pure Direct Mode Selects whether to output video signals during the Pure Direct mode. 129
Adaptive DSP Level Selects whether to automatically adjust the CINEMA DSP effect level. 129
CINEMA DSP 3D Mode
Enables/disables CINEMA DSP HD
3
.
130
Virtual Presence Speaker Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers. 130
Virtual Surround Back Speaker Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers. 130
DAC Digital Filter Selects the digital filter type of the audio DAC (digital-to-analog converter). 130
Object Decode Mode Enables/disables playback of object-based audio signals such as Dolby Atmos contents. 130
Video Video Mode Enables/disables the video signal processing (resolution, aspect ratio and video adjustments). 131
HDMI
HDMI Control Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input). 133
Audio Output Selects a device to output audio. 133
Standby Through Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. 134
Network
Network Connection Selects the network connection method. 134
IP Address Configures the network parameters (such as IP address). 135
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 135
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 136
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 136
Bluetooth
Bluetooth Enables/disables the
Bluetooth functions. 137
Audio Receive Disconnect Terminates the
Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. 79
Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from
Bluetooth devices ( Bluetooth standby). 137
Menu Item Function Page