User Manual

En 29
■ Audio jacks
❑ OPTICAL jacks
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
❑ COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial
cable.
❑ AUDIO jacks
Transmit analog stereo audio signals. Use a stereo pin
cable or an audio pin cable (RCA unbalanced cable).
❑ XLR jacks
Transmit analog audio signals. Use an XLR balanced
cable.
XLR input jacks
Match the pins and insert the “male” connector of the
XLR balanced cable until you hear a click.
• When disconnecting the cable from the unit, hold down the PUSH
button on the unit and then pull the connector out.
XLR output jacks
Match the pins and insert the “female” connector of the
XLR balanced cable until you hear a click.
• When disconnecting the cable from the unit, hold down the lever of
the connector and then pull it out.
Digital optical cable
Digital coaxial cable
Stereo pin cable
AUDIO 4
R
XLR balanced cable (male)
CENTER
PRE OUT
XLR balanced cable (female)
About the XLR jacks
• The pin assignments for the XLR jacks of the unit are shown
below. Before connecting an XLR balanced cable, refer to the
instruction manual of your device and verify that its XLR jacks
are compatible with the pin assignments.
XLR input jacks
3. COLD
3. COLD
2. HOT
2. HOT
XLR output jacks
1. GND
1. GND