User Manual
En 31
■ Unbalanced connection
Depending on the speaker system you want to use, connect the corresponding PRE
OUT (RCA) jacks of the unit to the amplifier with audio pin cables (RCA unbalanced
cables).
• We recommend using a power amplifier with volume control bypass (or without volume control circuit).
Connecting subwoofers
Connect the subwoofers (with built-in amplifier) to the PRE OUT jacks of the unit.
Select a balanced (XLR) or an unbalanced (RCA) connection depending on the input
jacks available on your subwoofer.
• The XLR jacks and RCA jacks output the same signals.
• You can also connect up to 2 subwoofers (with built-in amplifier) to the unit. When using 2 subwoofers,
configure the “Layout (Subwoofer)” setting (p.126) in the “Setup” menu after connecting the power cable to
an AC wall outlet.
■ Balanced connection
Connect the subwoofers (with built-in amplifier) to the SUBWOOFER PREOUT (XLR)
1–2 jacks of the unit with XLR balanced cables.
• Before connecting XLR balanced cables, refer to the instruction manual of your subwoofer and verify that
its XLR jacks are compatible with the pin assignments of the unit (p.29).
NETWORK
HDMI
D
)
AV 2 AV 3 AV 4
(HDCP2.2)
AV 5 AV 6 AV 7
IN OUT
REMOTE
FRON
T
PRES
EC
K
R
ROUND
BACK
SURROUND
SUBWOOFER
2
(REAR)
1
(FRONT)
SURROUND SURROUNDFRONT FRONTCENTER
PRE OUT
FM
Ω
ANTENNA
(
4 RADIO
)
1
2
E
OUT
ZONE 3
AM
PRE OUT
SUBWOOFER
CENTER
FRONT
PRESENCE
REAR
PRESENCE
FRONT
SURROUND
SURROUND
BACK
(SINGLE)
(FRONT)
(REAR)
RS-232C
TRIGGER
OUT
1
2
12V
0.1A
( 3
NET
)
Y
P
B PR
PRPB
Y
P
RPB
YPRPB
AV 1
COMPONENT VIDEO
A
AV 3
C
AV 2
B
MONITOR OUT/
ZONE OUT
Y
WIRELESS
R R
L L L L
LR
The unit (rear)
Main input
(RCA)
Power amplifier
Speaker
connections
PRE OUT
(RCA) jacks
Caution
• To prevent the generation of loud noises or abnormal sounds, make sure you remove the power cable
of the unit and turn off the subwoofer before making connections.
IN OUT
REMOTE
REAR
PRESENCE
FRONT
PRESENCEBACK
SURROUND
SUBWOOFER
2
(REAR)
1
(FRONT)
SURROUND
E
AR
S
ENCE
RS-232C
L L L L
LR
99
SUBWOOFER
2
(REAR)
1
(FRONT)
LR
XLR
XLR
XLR
XLR
The unit (rear)
XLR input
SUBWOOFER
PREOUT (XLR)
1–2 jacks
XLR input
(Male connector)
(Female connector)
(Male connector)
1 2 3 4 5 6 7 8 9 10 11 12