User Manual

14 En
Preparations
Connect speakers, the antenna, etc. and turn the unit on.
Do not connect the power cable of the unit until you have finished connecting all cables.
Connecting speakers
1 Remove the insulation from the ends
of the speaker cables to expose the
bare wires.
2 Connect speakers to the unit, as the
illustration shows.
• Prepare speakers, subwoofer and speaker cables
separately.
• For connection of the speakers, refer to the
owner’s manual supplied with them.
15 mm (5/8 in.)
Caution
• If the bare speaker wires touch each other or any metal part of the unit, it could damage the unit and/or the
speakers.
• Use speakers of at least 6 Ω impedance.
• Make sure that left and right (L, R) connections and polarity (red: +, black: -) are correct. If connections are incorrect, the
sound will be unnatural.
• You can also connect a subwoofer to the unit (it must have a built-in amplifier).
1
3
2
Right speaker
Left speaker
Subwoofer
Monaural pin cable
Speaker cable
Note