User Manual
Connecting to a network
20 En
This applies the network settings of your iOS device to the
unit.
• An iOS device with iOS 7.1 or later is required.
• Before starting setup, check that your iOS device is
connected to the wireless router.
1 Press .
2 Select [Network Config] with S/T,
and press .
3 Select [Select Network] with S/T,
and press .
4 Select [Wireless] with S/T, and press
.
5 Select [Share WiFi Set] with S/T, and
press .
• A message about the initialization of the network
will be shown on the front panel display. Press
ENTER.
6 Display the Wi-Fi setup screen on the
iOS device and select the unit from
“SETUP A NEW AIRPLAY SPEAKER...”.
• Follow the on-screen instructions displayed on
the iOS device.
• Once connected, the Wi-Fi indicator stays lit.
Sharing the settings of an iOS device
2, 3, 4, 5
/
,
ENTER
1
OPTION
• If the network settings of an iOS device are
applied, all network and Bluetooth connection
settings as well as account information for
streaming services will be initialized.
Note