User Manual

Connecting to a network
21 En
Connecting to a wired
network
1 Press .
2 Select [Network Config] with S/T,
and press .
3 Select [Select Network] with S/T,
and press .
4 Select [Wired] with S/T, and press
.
• By default, [Wired] is set for the unit.
2, 3, 4

/

,
ENTER
1
OPTION
• If you are using a router that does not support
DHCP, configure the network settings from
[Network Config] within Option settings
(& P.44).
• When setting the subnet manually, each server
must be connected to the same subnet as the
unit (& P.45).
Note