User Manual
Listening to music
28 En
Listening to DAB
stations (CRX-N470D only)
See “Connecting the antenna” (& P.15) for connecting
the supplied antenna to the unit.
Press repeatedly to select [DAB].
• Initial scan starts automatically when you select [DAB]
for the first time.
• When scanning is completed, the number of receivable
DAB stations is shown on the front panel display
momentarily, and the first station stored is played.
1 Press repeatedly to select [DAB].
• When the unit cannot receive the DAB signal, “Off
Air” is shown on the front panel display.
2 Press W/X to select a DAB station.
Initial scan
Tuning in DAB stations
OPTION
1
TUNER
2
/
• You can also perform an initial scan from the
Option settings.
1 Press when the source is DAB.
- Option menu is shown on the front panel
display.
2 Press S/T to select [Initial Scan] and press
.
- Initial scan starts and finishes automatically.
• If an initial scan is performed, stored DAB station
information and preset DAB stations are cleared.
• This unit can receive only Band III DAB
frequencies.
Frequency in MHz/Channel label
Note