User Manual
39 En
Connect the unit directly with a mobile device
Connect the unit directly with a mobile device wirelessly (Wireless Direct). Put up the wireless antenna of the unit in advance (& P.15).
1 Press .
2 Select [Network Config] with S/T,
and press .
3 Select [Select Network] with S/T,
and press .
4 Select [Direct] with S/T, and press
.
5 Select desired security method with
S/T, and press .
• Refer to the Note at right.
6 Check the SSID and the security key.
• These are required for step 7.
• You can check the values from the option menu -
[Network Info] - [Direct Info].
7 Configure the Wi-Fi settings of the
mobile device.
• Enable the Wi-Fi function of the mobile device.
• When the access points are listed, select the SSID
you have checked in step 6.
• When the mobile device prompts you to enter a
password, enter the security key you have
checked in step 6.
2, 3, 4, 5
/
,
ENTER
1
OPTION
Mobile
device
This unit
• The security methods selectable in step 5 are
[OPEN] and [WPA2-PSK(AES)].
If [OPEN] is selected, the connection may be
insecure since the communication is not
encrypted.
• You cannot simultaneously use this setting with
a wired network connection or a wireless
network connection.
• When using Wireless Direct, you cannot connect
the unit to the Internet. Therefore, the Internet
services, such as Internet radio, are unavailable.
• For details about how to set up the Wi-Fi
connection of the mobile device, see the user's
guide of your mobile device.
Note