User Manual

ADJUSTING TO THE DESIRED SOUND (A-U670 ONLY)
10 En
n Reproducing pure, high fidelity sound (PURE DIRECT)
With the PURE DIRECT function on, the BASS, TREBLE, and BALANCE circuits are
bypassed to reduce noises. Therefore, in all input sources, you can enjoy music playback
in straight and high quality sound.
Press the PURE DIRECT button on the front panel to switch the PURE DIRECT function
on or off.
The PURE DIRECT indicator lights up when this function is turned on.
The BASS, TREBLE, and BALANCE controls do not function while the PURE DIRECT function is
turned on.
Operation is available with the remote control of the network CD player (CD-NT670/CD-
NT670D).
Check if the SYSTEM jacks of the unit and the network CD player are connected to each
other.
Pressing the
A (power) button of the remote control causes the unit to turn on or enter the
standby mode by interlocking with the network CD player.
y
Even if the A (power) button on the unit is pressed, interlocking does not work. The unit and the
network CD player are independently turned on or enter the standby mode.
With either the unit or the network CD player on, if you press the
A (power) of the remote control,
the unit will be turned on or enter the standby mode according to the status of the network CD player.
You can adjust the sound volume by pressing the VOLUME +/– buttons of the remote
control.
You can turn on or off mute by pressing the MUTE button on the remote control.
You can select USB as the input source of the unit by pressing the USB button of the
remote control (or rotate the INPUT knob of the connected network CD player).
ADJUSTING TO THE DESIRED SOUND (A-U670
ONLY)
Notes
PURE DIRECT
INTERLOCKING WITH A NETWORK CD PLAYER
Operating the power with the remote control
Adjusting the sound volume with the remote control
Operating mute with the remote control
Selecting input (A-U670 only)