User Manual

12 En
Connections
■ Bi-wire connection
Bi-wire connection separates the woofer from the
combined midrange and tweeter section. A bi-wire
compatible speaker has four binding post terminals. These
two sets of terminals allow the speaker to be split into two
independent sections. With these connections, the mid and
high frequency drivers are connected to one set of terminals
and the low frequency driver to another set of terminals.
Connect the other speaker to the other set of terminals in
the same way.
Note
• When making bi-wire connections, remove the shorting bridges
or cables on the speaker. Refer to the speakers’ instruction
manuals for more information.
• To use the bi-wire connections, press SPEAKERS A and
SPEAKERS B on the front panel or on the remote control so
that both “A” and “B” indicators light up on the front display.
A
B
SPEAK
This unit
Speaker
VOLUME
PURE DIRECT
RETURN
CONNECT
PUSH - ENTER
TUNINGPRESET BAND MEMORY CLEAR
BASSINPUT
5V 1A
BALANCE
LR
TREBLE
LOUDNESS
FLAT
-30dB
DIMMER MODE DISPLAY
SELECT
PHONES
YPAO MIC
SPEAKERS USB
AB
SPEAKERS A/B
OPT 1 OPT 2 CD
COAX 1 COAX 2 BLUETOOTH
SLEEP PHONO
B
A
SPEAKERS
SPEAKERS A/B