User Manual

En 133
Removing the limitation on HDMI video output
(MONITOR CHECK)
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in “Resolution”
(p.119) when the unit cannot detect the TV’s resolution or when you want to specify a
different resolution than the detected resolution.
Settings
• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after “MONITOR CHECK” has been set to “SKIP”.
Selecting the HDMI 4K signal format (4K MODE)
Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz)
compatible TV and playback device are connected to the unit.
Settings
• When “MODE 1” is selected, use a high-speed HDMI cable that supports 18 Gbps.
Backing up/recovering the settings (RECOV./BACKUP)
Creates backup of the settings of the unit, or recovers the settings from the backup.
■ Backup/recovery procedure
1
Press STRAIGHT repeatedly to select “BACKUP” or “RECOVERY” and press INFO
to start the process.
Choices
Restoring the default settings (INITIALIZE)
Restores the default settings for the unit.
Choices
YES
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
MODE 1
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
(4:2:0 format only for VIDEO AUX [HDMI IN] jack)
Depending on the connected device or HDMI cables, video may not
be displayed correctly. In this case, select “MODE 2”.
MODE 2
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
OUT 1 IN OUT 2
VOLUME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1 SL SW2SW SR
PL CL R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
YES
MONITORCHECK
OUT 1 IN OUT 2
VOLUME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1 SL SW2SW SR
PL CL R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
MODE2
4KMODE
BACKUP Creates backup of the settings of the unit in the internal memory.
RECOVERY
Recovers the settings of the unit from the backup (available only when
backup has been created).
Note
• Do not turn off the unit during the recovery process. Otherwise, the settings may not be restored
correctly.
• The backup does not contain user information (such as user accounts and passwords).
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
OUT 1 IN OUT 2
VOLUME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1 SL SW2SW SR
PL CL R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
BACKUP
RECOV./BACKUP
OUT 1 IN OUT 2
VOLUME MUTE
DRCADAPTIVE
3
ZONE
2
SBLPL SBRSB PR
SW1 SL SW2SW SR
PL CL R PR
STEREO
ENHANCER SLEEP
HD
TUNED PRE AMP PAR TY
ZONE
3
ZONE
4
HD
TAG
DOCK
SPIMP.-
CANCEL
INITIALIZE