User Manual

En 156
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press MAIN ZONE z .
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE z to set the unit to standby mode and turn it on
again.
The new settings take effect.
ADVANCED SETUP menu items
• Default settings are underlined.
Configuring the system settings
(ADVANCED SETUP menu)
MAIN ZONE z STRAIGHT
PROGRAM
Item Function Page
SPEAKER IMP. Changes the speaker impedance setting. 157
REMOTE SENSOR Turns on/off of the remote control sensor on the main unit. 157
REMOTE CON AMP Selects the unit’s remote control ID. 157
TUNER FRQ STEP
(Asia and General models only)
Changes the FM/AM tuning frequency setting.
157
TV FORMAT Switches the video signal type. 158
MONITOR CHECK Removes the limitation on HDMI video output. 158
4K MODE Selects the HDMI 4K (60 Hz/50 Hz) signal format. 158
RECOV./BACKUP
Creates backup of the settings of the unit, or recovers the settings
from the backup.
159
INITIALIZE Restores the default settings. 159
FIRM UPDATE Updates the firmware. 159
VERSION Checks the version of firmware currently installed on the unit. 159