User Manual

En 106
⬛ Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at Zone2 or
Zone4. If you connect an AV amplifier, you can enjoy multichannel playback in another room
(Zone4).
Y
• To watch videos played back on a video device at Zone2 or Zone4, you need to connect the video device to the
unit with an HDMI cable (p.44).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• On-screen operations are not available for Zone2 and Zone4.
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2 or Zone4, set “HDMI OUT2 Assign” (p.147)
in the “Setup” menu to “Zone2” or “Zone4”.
X
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output from the
HDMI OUT 2 jack by setting “Audio Output” (p.147) in the “Setup” menu to “On” or “Off” (default).
• You can also use speakers placed in Zone2 to output audio (p.39).
HDMI OUT
ARC
(ZONE OUT)
1
2
HDMI
(1 BD/DVD)
AV 1 AV 2 AV 3
AV
(HDCP
AV 1 AV 2 AV 3 AV 4
1
AUDIO 2 AUDIO 3
(1 BD/DVD)
OPTICAL
4
AL
3
COAXIAL COAXIAL
2
COAXIAL
FM
75ȍ
ANTENNA
(
4 RADIO
)
OPTICAL
ZONE OUT/PRE OUT
ZONE 2/
F. PRESENCE
ZONE 3/
R. PRESENCE
SURRO
SURROUND
R
5
6
L R
AM
PRE OUT
FRONT SURROUND SUR. BACK
(SINGLE)
Y
P
B PR
PR
PB
AV 1
A
MONITOR OUT/
ZONE OUT
Y
(HDCP2.2)
HDMI
HDMI
(ZONE OUT)
2
HDMI OUT
(HDCP2.2)
HDMI
HDMI
HDMI
The unit (rear)
HDMI OUT 2
(ZONE OUT) jack
Zone4
Main zone
HDMI input
(Example: using a TV)
HDMI input
(Example: using an AV amplifier)
Zone2 or Zone4
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings