User Manual

En 125
CONFIGURATIONS
Configuring various functions (Setup menu)
Perform the following basic procedure to operate the “Setup” menu. You can configure the
unit’s various functions with the “Setup” menu.
X
• If new firmware is available, the message screen appears.
• If new firmware is available, the envelope icon (p) appears at the lower of the “Setup” menu.
1
Press SETUP.
2
Use the cursor keys to select a menu and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
4
Use the cursor keys to select a setting.
5
Press SETUP.
This completes the settings.