User Manual

Restoring the default settings (INIT)
VOL.
MUTE
ENHANCER STEREO TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
INIT••••CANCEL
Restores the default settings for the unit.
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
Updating the firmware (UPDATE)
VOL.
MUTE
ENHANCER STEREO TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
UPDATE•••••USB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
n
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and
press INFO to start firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
Checking the firmware version (VERSION)
VOL.
MUTE
ENHANCER STEREO TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
VERSION••xx.xx
Check the version of firmware currently installed on the unit.
Note
▪ You can also check the firmware version in “Network Update” (p.101) in the “Setup” menu.
▪ It may take a while until the firmware version is displayed.
En
105