User Manual
Updating the unit’s firmware via the network
New firmware that provides additional features or product improvements will be
released as needed. If the unit is connected to the Internet, you can download the
firmware via the network and update it.
Notice
▪ Do not operate the unit or disconnect the power cable or network cable during firmware update.
Firmware update takes about 20 minutes or more (depending on your Internet connection speed).
▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network
update may not be possible depending on the condition of the wireless connection. In this case, update
the firmware using the USB memory device (
p.114).
▪
To perform the following procedure, your TV must be connected to the unit via HDMI. If not, perform the
update from the “ADVANCED SETUP
” menu (p.114
).
▪ For details on update, visit the Yamaha website.
Note
▪ You can also update the firmware using the USB memory device from the “ADVANCED SETUP” menu
(p.114).
▪ The firmware update indicator on the front display lights up when a firmware update is available via the
network.
A firmware update is available if the following message is displayed after SETUP is
pressed.
You can switch the language.
Updating the unit’s firmware immediately
1
Read the on-screen description and press the cursor key (w).
2
To start the firmware update, press ENTER.
The on-screen display turns off.
3
If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the
front display, press z (power) on the front panel.
The firmware update is complete.
Updating the unit’s firmware at power off
1
Read the on-screen description and press the cursor key (w).
The next screen appears on the TV.
2
Read the on-screen description and press the cursor key (w).
3
To set the firmware to update at power off, press ENTER.
4
Press z (receiver power) to turn off the unit.
A screen asking you to confirm the firmware update is displayed.
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VI RTU AL
VOL .
UPDATE ENTER
En
115