User Manual

En 115
Network
Network Connection Selects the network connection method. 125
IP Address Configures the network parameters (such as IP address). 125
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 125
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 126
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 126
MusicCast Link Power Interlock
Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the power of
other devices of the network.
126
Bluetooth
Bluetooth Enables/disables the Bluetooth functions. 127
Audio Receive
Disconnect Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit. 78
Bluetooth Standby Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby). 127
Audio Send
Transmitter Enables/disables the Bluetooth audio transmitter function. 127
Device Search Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter. 79
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the TV screen. 128
Zone2 Set
Volume Enables/disables volume adjustments for Zone2 output. 128
Max Volume Sets the Zone2 limit value of the volumes. 128
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 128
Audio Delay Adjusts the audio output timing for Zone2. 128
Mono Switches between stereo and monaural for Zone2 output. 129
Enhancer Enables/disables Compressed Music Enhancer for Zone2 output. 129
Tone Control Adjusts the level of high-frequency range and low-frequency range for Zone2 output. 129
Extra Bass Enables/disables Extra Bass for Zone2 output. 129
Balance Adjusts the volume balance for Zone2 output. 129
Zone Rename Changes the zone name (for Zone2) displayed on the TV screen. 129
Party Mode Set Enables/disables switching to the party mode. 129
Function
Remote PROGRAM Key Select the function that is assigned to the PROGRAM key. 130
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 130
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 130
Wallpaper Selects the image to be used as wallpaper on the TV. 130
Trigger Output
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 131
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 131
Memory Guard Prevents accidental changes to the settings. 131
Menu Item Function Page