User Manual

Setting the Zone2 limit value of the volume

Sets the Zone2 limit value of the volume adjusted by using such as VOLUME keys on

the remote control.

Setup menu

“Sound” > “Volume” > “Zone2 Max Volume”

Setting range

-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.0 to 95.0 (5.0 increments),

97.0]

NOTE

This setting is available only when “Power Amp Assign” is set to “Zone 2”. For details on “Power Amp Assign”

in the “Setup” menu, see the following:

▪ “Setting your speaker system” (p.91)

Setting the Zone2 initial volume when the Zone2

output is enabled

Sets the Zone2 initial volume when the Zone2 output is enabled.

Setup menu

“Sound” > “Volume” > “Zone2 Initial Volume”

Settings

Off

Sets the level to the volume level of the unit when it last entered standby

mode.

Mute Sets the unit to mute the audio output.

-80.0 dB to +16.5 dB

(0.5 dB increments)

[0.5 to 97.0

(0.5 increments)]

Sets the level to the specified volume level.

NOTE

▪ This setting is available only when “Power Amp Assign” is set to “Zone 2”. For details on “Power Amp

Assign” in the “Setup” menu, see the following:

–

“Setting your speaker system” (p.91)

▪ This setting works only when the volume level is set lower than “Zone2 Max Volume”. For details on

“Zone2 Max Volume” in the “

Setup” menu, see the following:

– “Setting the Zone2 limit value of the volume” (p.103)

103