User Manual

Configuring the advanced settings (ADVANCED SETUP menu)

Basic operation of the ADVANCED SETUP menu

Perform the following basic procedure to operate the “ADVANCED SETUP” menu while

viewing the front display.

Set the unit to standby mode.

While holding down STRAIGHT on the front panel, press

z (power).

(power)

STRAIGHT

PROGRAM

The top item and its setting of the “ADVANCED SETUP” menu appear on

the front display.

Press PROGRAM to select an item.

Press STRAIGHT to select a setting.

Press z (power) to set the unit to standby mode and turn it on

again.

This completes the settings.

NOTE

For details on the default settings, see the following:

▪ “Default settings of the ADVANCED SETUP menu” (p.156)

ADVANCED SETUP menu items

Use the following table to configure system settings of the unit.

Item Function Page

SP IMP. Changes the speaker impedance setting. p.116

REMOTE ID Selects the unit’s remote control ID. p.116

(Asia, Taiwan, and Central and South America models only)

Changes the FM/AM tuning frequency setting.

p.116

TV FORMAT Switches the video signal type of HDMI output. p.116

4K MODE Selects the HDMI 4K signal format. p.117

BKUP/RSTR Backups and restores all the settings for the unit. p.117

INIT Restores the default settings. p.118

UPDATE Updates the firmware. p.118

VERSION Checks the version of firmware currently installed on the unit. p.118

115