User Manual
Playing back music stored on a USB storage device
Playback of USB storage device contents
You can play back music files stored on a USB storage device on the unit.
NOTE
For details on playable USB devices and USB file formats, see the following:
▪ “Supported USB devices” (p.144)
▪ “Supported file formats” (p.145)
1
Connect the USB storage device to the USB jack.
AUX
AUDIO
5V
1A
The unit (front)
USB storage device
NOTE
▪ If the USB storage device contains many files, it may take time to load them. In this case,
“Loading…” appears on the front display.
▪
Stop playback of the USB storage device before disconnecting it from the USB jack.
▪ Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables.
▪ The unit cannot charge USB devices while it is in standby mode.
2
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
NOTE
If playback is ongoing, the playback screen is displayed.
3
Use the cursor keys to select an item and press ENTER.
If a song is selected, playback starts and the playback screen is
displayed.
NOTE
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ To switch the screen mode browse/playback/off, press DISPLAY.
NOTE
▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:
– “Configuring the shuffle setting” (p.84)
– “Configuring the repeat setting” (p.84)
▪ You can register contents as shortcuts and access them directly. For details, see the following:
– “Registering a favorite content as shortcut” (p.73)
En
66