User Manual

Configuring the advanced settings (ADVANCED SETUP menu)
Basic operation of the ADVANCED SETUP menu
Perform the following basic procedure to operate the “ADVANCED SETUP” menu while
viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
(power)
z
STRAIGHTPROGRAM
The top item and its setting of the “ADVANCED SETUP” menu appear on
the front display.
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the ADVANCED SETUP menu” (p.158)
ADVANCED SETUP menu items
Use the following table to configure system settings of the unit.
Item Function Page
SP IMP.
(U.S.A. and Canada models only)
Changes the speaker impedance setting.
p.118
REMOTE ID Selects the unit’s remote control ID. p.118
TU
(Asia, Taiwan, Brazil, General, and Central and South America
models only)
Changes the FM/AM tuning frequency setting.
p.118
TV FORMAT Switches the video signal type of HDMI output. p.118
4K MODE Selects the HDMI 4K signal format. p.119
BKUP/RSTR Backups and restores all the settings for the unit. p.119
INIT Restores the default settings. p.120
UPDATE Updates the firmware. p.120
VERSION Checks the version of firmware currently installed on the unit. p.120
En
117