User Manual

En 120
Function
Configures the functions that make the unit easier to use.
⬛ Remote PROGRAM Key
Select the function that is assigned to the PROGRAM key on the remote control.
When "INPUT Selection" is selected, the PROGRAM key on the remote control will operate as
the input switching key.
Settings
Y
This setting does not change the function of the PROGRAM key on the front panel.
⬛ Display Set
Configures the settings related to the front display and TV screen display.
Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0
(higher to brighten)
Y
The front display may become dark when “ECO Mode” (p.122) is set to “On”.
Short Message
Selects whether to display short messages on the TV screen when the unit is operated (such as
input selection and volume adjustment).
Settings
Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
DSP Program Selection
Enables switching the DSP Programs.
INPUT Selection Enables switching the INPUT sources.
NET Selection Enables switching the NETWORK sources.
Preset Selection
Enables switching between the preset radio stations and registered
favorite items (shortcut) (p.85).
Browse Screen - 1 page Up/Down Enables scrolling the Browse Screen.
Subwoofer Trim Enables fine-adjusting the subwoofer volume.
Dialogue Level Enables adjusting the volume of dialogue sounds.
q Repeat /w Shuffle Enables switching shuffle/repeat settings.
On Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
Piano
Displays the piano image on the TV screen when there is no video signal.
Gray Displays a gray background on the TV screen when there is no video signal.