User Manual
En 29
⬛ Audio jacks
To input/output only audio signals, use the following jacks.
OPTICAL jacks
Transmit digital audio signals. Use a digital optical cable. Remove the tip protector (if
available) before using the cable.
COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial cable.
AUDIO jacks
(Stereo L/R jacks)
Transmit analog stereo audio signals. Use a stereo pin cable (RCA cable).
(Stereo mini jack)
Transmits analog stereo audio signals. Use a stereo mini-plug cable.
Connecting a TV
Connect the TV to the unit with an HDMI cable and a digital optical cable.
X
• You do not make a digital optical cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
• If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s power
and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details
on the settings, see “Information on HDMI” (p.145).
OPTICAL
Digital optical cable
COAXIAL
Digital coaxial cable
Stereo pin cable
Stereo mini-plug cable
AUDIO
About Audio Return Channel (ARC)
• ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
• When using ARC, connect a TV with an HDMI cable that supports ARC.
AUDIO
4
AUDIO
5
OPTICAL
OPTICAL
COAXIAL
COAXIAL
AUDIO
1
AUDIO
2
AUDIO
3
AV 1 AV 2
(2
TV)
P
B
Y
P
R
(
1
BD
/DVD
)
HDMI
(
HDCP2.
21
(
HDCP2.2
)
ARC
ANTENNA
FM
AM
VIDEO
ZONE OUT
ZONE
2
REMOTE
IN
OUT
TRIGGER OUT
12V
0.1A
COMPONENT VIDEO
HDMI
OUT
(
4
RADIO
)
PHONO
GND
OPTICAL
O
O
HDMI
HDMI
OUT
1
ARC
HDMI
HDMI
(HDCP2.2)
OPTICAL
AUDIO 1
(2 TV)
The unit (rear)
HDMI OUT jack
AUDIO 1 jack
Audio output
(digital optical)
TV
HDMI input