User Manual

ManualsBrandsYamaha ManualsAudio & VideoMusicCast WX-030

Printed in China ZT49710-1

You can use two WX-030 to reproduce stereo sound by setting each speaker as a right or left

speaker. Set the left and right speakers separately by following the steps below.

• To use the Stereo Pair function, you need two WX-030.

• Before setting the Stereo Pair, update the dedicated app

“MusicCast CONTROLLER” and the firmware of both units

to the latest version (refer to the owner’s manual).

• Stereo

Pair is available only when the Network Standby

mode of the unit is enabled.

A Connect each WX-030 to the same network by

using the dedicated app “MusicCast

CONTROLLER”.

When the WX-030 is linked to other MusicCast unit,

cancel the link by using the dedicated app “MusicCast

CONTROLLER”.

B Tap (power)/CONNECT of each unit to set

them to standby mode.

C Tap and hold the following together for

3 seconds to set the left/right speakers.

1 For setting the left speaker: and

Indicators light from right to left repeatedly (refer to

of the table on the right), and the unit enters pairing

standby mode.

2 For setting the right speaker: and

Indicators light from left to right repeatedly (refer to

of the table on the right), and the units start pairing.

After paring is completed, the indicators light from the

center to both sides (refer to of the table on the right),

and all indicators return to the normal status.

D Use the dedicated app “MusicCast

CONTROLLER” to play back.

• You can check which speaker is the left or right speaker with

the dedicated app “MusicCast CONTROLLER” (Indicators

light as or of the table on the right).

• In Stereo Pair mode, you can operate one speaker to

simultaneously turn off both speakers or adjust the volume

of both speakers.

The Stereo Pair setting remains even if the speakers enter

standby mode or the power cable is unplugged and plugged

again.

Tap and hold (or ) and on either

speaker together for 3 seconds.

Indicators light from both sides to the center (refer to

of the table on the bottom) and Stereo Pair will be

canceled.

• The Stereo Pair can be canceled only during standby mode.

• If you cancel Stereo Pair with one of the two speakers, the

other one will be canceled automatically.

• If one of the two speakers is disconnected from the network

when canceling the Stereo Pair, cancel Stereo Pair on each

speaker.

Left

speaker

Right

speaker

WX-030

Note

Setting/Playing back music

Note

Canceling Stereo Pair

Indicator display during the Stereo

Pai

Stereo Pair

status

Indicator display

Start Pairing/

Checking the

Left and Right

Speaker

Pairing

Completed

Canceling

Stereo Pair

Note

Left speaker Right speaker

Right-to-Left Left-to-Right

Center to both sides

Both sides to center

Supplement for Stereo Pair

Summary of content (3 pages)

PAGE 1
Supplement for Stereo Pair You can use two WX-030 to reproduce stereo sound by setting each speaker as a right or left speaker. Set the left and right speakers separately by following the steps below. Left speaker Note WX-030 WX-030 Right speaker Setting/Playing back music A Connect each WX-030 to the same network by using the dedicated app “MusicCast CONTROLLER”. When the WX-030 is linked to other MusicCast unit, cancel the link by using the dedicated app “MusicCast CONTROLLER”.
PAGE 2
Supplément relatif à la Paire Stéréo Vous pouvez utiliser deux WX-030 pour reproduire un son stéréo en réglant chaque haut-parleur en tant que haut-parleur droit ou gauche. Séparez le haut-parleur droit du haut-parleur gauche en suivant les étapes ci-dessous. Hautparleur gauche Remarque WX-030 WX-030 Hautparleur droit Réglage/Lecture de la musique A Connectez chaque WX-030 au même réseau à l’aide de l’application dédiée « MusicCast CONTROLLER ».
PAGE 3
Instrucciones complementarias para el Emparejamiento stereo Puede usar dos WX-030 para reproducir sonido estéreo configurando uno como altavoz derecho y el otro como altavoz izquierdo. Configure los altavoces izquierdo y derecho por separado, siguiendo los pasos indicados a continuación. Altavoz izquierdo Nota WX-030 WX-030 Altavoz derecho Configuración/reproducción de música A Conecte cada WX-030 a la misma red usando la app “MusicCast CONTROLLER”.