User Manual

PREPARATIONS ➤ e Connecting the power cable En 29
Connecting the subwoofer
Plug the subwoofer’s power cable into a wall outlet. When the center unit is turned on,
the center unit and subwoofer are automatically connected via wireless connection.
Once the connection has been successfully established, the STATUS indicator on the
subwoofer glows as shown in the illustration below, and the unit is ready for play back.
• If the STATUS indicator does not glow properly the first time the unit is turned on, pair the center unit and
subwoofer manually. See “Pairing the center unit and subwoofer” (p. 105).
STATUS
STATUS indicator
Glows green
If there is no sound coming from the subwoofer, or if sound is intermittent, due to the influence of
radio waves from other devices, connecting the center unit and subwoofer via cables will solve
the problem. Connect the center unit and subwoofer via an RCA mono cable and a 3.5 mm
monaural mini plug cable. A 3.5 mm monaural mini plug cable is required to turn the center unit
and subwoofer on and off at the same time.
To connect the center unit and subwoofer using a wired connection, set “Bass Out” of
“Subwoofer” in the setup menu to “Wired” (p. 76).
When the center unit is turned on, the subwoofer turns on and its STATUS indicator glows green.
• Be sure the center unit is turned off before connecting the subwoofer.
• The subwoofer supplied with the unit can only be connected.
SYSTEM
CONNECTOR
INTELLIBEAM
MIC
R AUX1 L
AUX2
TV
NETWORK
OUT (ARC)
UPDATE ONLY
SUBWOOFER
OUT
IN 1
HDMI
IN 2 IN 3
SYSTEM
CONNECTOR
SUBWOOFER
PAIRING
INPUTSTATUS
SYSTEM
CONNECTOR
SUBWOOFER
OUT
INPUT
SYSTEM
CONNECTOR
RCA mono cable
3.5 mm monaural mini plug cable
1 2 3 4 5 6