User Manual

PLAYBACK ➤ Basic operation for playback En 39

PLAYBACK

Press the z key to turn on this unit.

It may take a few seconds for sound to play from the center

unit and subwoofer after the unit is turned on.

Turn on devices (TV, BD/DVD player, game console,

etc.) connected to this unit.

Select a device by pressing the input selector key or

NET key corresponding to the connection of

external devices.

Press the HDMI1 key to play audio/video content from a

BD/DVD player connected via the HDMI IN1 jack.

For playback from a Bluetooth device, refer to p. 47. For

audio playback via a network, refer to p. 62 to 68.

• You can also select an input source with the MusicCast CONTROLLER app

installed on your mobile device (p. 50).

Play back a device selected in step 3.

Press the VOL (+/-) key to adjust the volume. Press

the SUB (+/-) key to adjust the volume of the

subwoofer.

• When audio is output from both TV speaker and this unit,

mute the TV sound.

• When sound input to HDMI IN jack is output from the TV,

the volume level does not change even if you press the

VOL (+/-) key or the MUTE ( ) key.

• To mute the sound, press the MUTE ( ) key. “MUTE

ON” is shown in the front panel display. To resume the

volume, press the MUTE ( ) key again or press VOL (+/

-) key. When the MUTE ( ) key is pressed, “MUTE OFF”

is shown in the front panel display.

• The subwoofer volume can be adjusted separately from the whole volume.

• Lowering the subwoofer volume is recommended at night.

• You can also adjust the volume with the MusicCast CONTROLLER app

installed on your mobile device (p. 50).

Select surround playback, stereo playback, or target

playback mode, and configure sound setting

according to your preferences (p. 40).

Basic operation for playback

HDMI1

Input source name

MUTE ( )

VOL (+/

)

SUB (+/

)

Input selector

keys