User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
MX49 MX61 MX88 Reference Manual
Basic Structure
Using a Connected
Computer
Using iOS
Applications
Basic Structure
Controller Block
Tone Generator Block
Effect Block
Arpeggio Block
Song/Pattern
Playing Block
Internal Memory
MIDI/Audio Signal Flow
Connecting to a computer
Creating a Song with a
computer
Reference
Performance
Song/Pattern
File
Utility
Remote
26
9 If necessary, turn the metronome on.
Click on “CLICK” in the Transport Panel (or press C) to turn the metronome on.
10 Record the instrument performance to the selected MIDI track.
After setting the time position to zero, click (Record). When you begin playing the instrument, recording of
your performance starts. When you’ve finished, click (Stop) to stop recording.
11 Create other MIDI tracks as needed, and record more parts of your performance using other
Voices of the instrument.
Repeat steps 6 to 10 above. After finishing recording as desired, go on to step 12.
12 Check the recorded data in all tracks.
After setting the time position to zero, click (Start). If necessary, correct or edit the MIDI data on Cubase to
complete the song data. For instructions on using Cubase, refer to the documentation provided with the software.