User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
MX49 MX61 MX88 Reference Manual
Basic Structure
Using a Connected
Computer
Using iOS
Applications
Basic Structure
Controller Block
Tone Generator Block
Effect Block
Arpeggio Block
Song/Pattern
Playing Block
Internal Memory
MIDI/Audio Signal Flow
Connecting to a computer
Creating a Song with a
computer
Reference
Performance
Song/Pattern
File
Utility
Remote
36
[ADD INST TRACK]([SYN COMP]) button – [DELETE]([ETHNIC]) button
When using Cubase, the following fixed functions are assigned to [ADD INST TRACK]([SYN COMP]) –
[DELETE]([ETHNIC]). The appropriate function of Cubase is assigned to each button.
NOTE Even if you are using DAW software other than Cubase, the functions are assigned automatically to the [ADD INST
TRACK]([SYN COMP]) – [DELETE]([ETHNIC]) buttons. However, the actual functions on your DAW software may not be the
same. Before using these Category buttons, you should assign the desired functions to these buttons on your particular
software. Please note that these buttons do not work in Digital Performer.
When selecting multiple tracks, please keep in mind the following points:
• [VSTi WINDOW] function applies to the top track.
• [EDIT CH SET] function applies only to the top track.
• [AUTOMATION READ]/[AUTOMATION WRITE]/[DELETE] functions apply to all selected tacks.
Operating the Knobs [A] – [D]
Knobs [A] – [D] let you control the parameters of
the selected track or the selected VSTi. The
appropriate functions for the current VSTi are
automatically assigned by the Control Template
to the Knobs. Each Control Template features
three sets of the Knob [A] – [D] functions. You can
switch the set by pressing the [KNOB
FUNCTION] button.
Moving the cursor and other functions
The Cursor [<]/[u]/[d]/[>] buttons let you move the cursor up/down/left/right on the
DAW software. The [EXIT] button functions the same as the [Esc] key of the
computer. The [ENTER] button functions the same as the [Enter] key of the computer.
Buttons Functions
[ADD INST TRACK] Opens/closes the [Add Instrument Track] dialog.
[VSTi WINDOW] Opens/closes the VSTi display for the selected track.
[EDIT CH SET] Opens/closes the settings window for the channel of the selected track.
[AUTOMATION READ] Switches Automation Read for the selected track on or off.
[AUTOMATION WRITE] Switches Automation Write for the selected track on or off.
[DELETE] Deletes selected data in track