User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
Song/Pattern File Utility RemotePerformance
MX49 MX61 MX88 Reference Manual
Performance
Performance Play
Performance Select
Performance Part Select
Performance Edit
Common Edit
Chorus Eff
Reverb Eff
Master EQ
Arp Switch
General
Name
Part Edit
Play Mode
Filter/EG
Arp Select
Receive Switch
Voice Edit
Voice Insert Eff /
DrumKit Insert Eff
Voice LFO
Voice Ctrl Set /
DrumKit Ctrl Set
Voice N ame /
DrumKit Name
Voice Job
Voice Store
Performance Job
Initialize
Recall
Copy
Bulk
Performance Store
Supplementary
Information
42
Second and subsequent pages
1 Part number
Indicates the selected Part number.
2 Part parameter
Indicates the parameter name to be edited, and the parameter value for the selected Part. A single parameter is
indicated in each page. You can change the value of the selected Part by using the [DATA] dial or the [INC/YES]/[DEC/
NO] buttons.
3 Page indicator
Indicates that the display has several pages. You can call up the previous/next page by using the Cursor [u]/[d]
buttons.
4 Parameter values for Parts 1 – 16
For most parameters, the selected parameter value is also indicated as a graphic knob indicating the value (2) for
each Part. You can change the value for the selected Part by using the [DATA] dial or the [INC/YES]/[DEC/NO] buttons.
To change the Part, use the Cursor [
<]/[>] buttons.
Parameter Description
Pan Determines the stereo pan position for each Part.
Settings: L63 (far left) – C (center) – R63 (far right)
Volume Determines the volume for each part, allowing you to set the optimum level balance of all the Parts.
Settings: 0 – 127
ChoSend
(Chorus Send)
Determines the Send level of the signal sent to the Chorus effect, allowing you to set the desired amount of
Chorus for each Part.
Settings: 0 – 127
RevSend
(Reverb Send)
Determines the Send level of the signal sent to the Reverb effect, allowing you to set the desired amount of
Reverb for each Part.
Settings: 0 – 127
DryLevel Determines the level of the dry sound, the sound not processed with the System Effect (Chorus, Reverb)—
letting you control the overall effect balance among the Parts.
Settings: 0 – 127
InsSw
(Insertion Effect Switch)
Determines the Parts available for the Insertion Effect. When this switch is set to on, the Insertion Effect of the
Voice assigned to the Part is enabled. The Insertion Effect can be applied to a maximum of four Parts of the
Performance.
Settings: off, on
ArpSw
(Arpeggio Switch)
Determines the Parts available for the Arpeggio function. Arpeggio can be applied to a maximum of two
Parts of the Performance.
Settings: off, on
Part01*******Pan=C
dqqqfghjkl;jjjjjjjjj
3
1
3 4
2
(Second page)