User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
File Utility RemotePerformance Song/Pattern
MX49 MX61 MX88 Reference Manual
Song/Pattern setting
Song
Pattern
58
Song/Pattern settings
This section explains parameters related to Songs and Rhythm Patterns. You can play the Song or Pattern called up in
this display by pressing the [R/K] (Play/Pause) button, and stop it by pressing the [J] (Stop) button.
Song
MIDI data (SMF) and audio data (WAV files) in the USB flash memory connected to this instrument can be played back
as a Song on this instrument.
1 Song playback location
Indicates the playback location of the selected Song. When the selected Song is MIDI data, Measure and Beat are
indicated. When the selected Song is audio data, Minutes and Seconds are indicated.
2 File
Selects a desired Song from the MIDI data and audio data in the USB flash memory connected to this instrument.
NOTE Only SMF format 0 MIDI data can be played back on this instrument.
NOTE Only 44.1kHz/16-bit stereo WAV file audio data can be used for playback on this instrument.
3 WAV Volume
Adjusts the volume of the audio data. This parameter is linked to the same parameter of the Utility General display
(page 64).
Settings: 0 – 127
Operation
Press [EXT. SONG] Edit parameters in Song display
SONG**********001:01
a**File=MYSONG01.MID
SONG**********001:01
s*****WAV*Volume=100
1
2
3