User Manual
Table Of Contents
- Using the Manuals
- Basic Structure
- Using a Connected Computer
- Connecting to a computer
- Creating a Song with a computer
- Recording your performance on the instrument to DAW software as MIDI data
- Recording your performance on the instrument to DAW software as audio data
- Recording Arpeggio phrases of the instrument to DAW software as MIDI data
- Remote-controlling DAW software or VSTi (software instruments) from the instrument
- Remote Control Assignments
- Using iOS Applications
- Reference
Song/Pattern File Utility RemotePerformance
MX49 MX61 MX88 Reference Manual
Performance
Performance Play
Performance Select
Performance Part Select
Performance Edit
Common Edit
Chorus Eff
Reverb Eff
Master EQ
Arp Switch
General
Name
Part Edit
Play Mode
Filter/EG
Arp Select
Receive Switch
Voice Edit
Voice Insert Eff /
DrumKit Insert Eff
Voice LFO
Voice Ctrl Set /
DrumKit Ctrl Set
Voice N ame /
DrumKit Name
Voice Job
Voice Store
Performance Job
Initialize
Recall
Copy
Bulk
Performance Store
Supplementary
Information
44
From this display you can apply five-band equalization (LOW, LOW MID, MID, HIGH MID, HIGH) to all Parts of the
selected Performance, or to all Voices.
Effect parameter The Effect parameter differs depending on the currently selected Effect type. For information on the editable
Effect parameters in each Effect type, see the “Data List” PDF document. Also, for detailed descriptions of the
each Effect parameter, see the “Synthesizer Parameter Manual” PDF document.
Master EQ
Parameter Description
Shape Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the
signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at
frequencies above or below the specified Frequency setting. This parameter is available only for the LOW and
HIGH frequency bands.
Settings: shelv (Shelving type), peak (Peaking type)
shelv
peak
Freq
(Frequency)
Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting.
Settings: LOW: Shelving 32Hz – 2.0kHz, Peaking 63Hz – 2.0kHz
LOW MID, MID, HIGH MID: 100Hz – 10.0kHz
HIGH: 500Hz – 16.0kHz
Gain Determines the level gain for Frequency (above), or the amount the selected frequency band is attenuated or
boosted.
Settings: -12dB – +0dB – +12dB
Q
(Frequency
Characteristics)
Determines the bandwidth for the Frequency (above) to create various frequency curve characteristics. Larger
values result in a narrower bandwidth.
Settings: 0.1 – 12.0
NOTE
For details on EQ structure, see the “Synthesizer Parameter Manual” PDF document.
Parameter Description
Low HighHi-MidMidLo-Mid
–
+
0
Gain
Q (frequency bandwidth)
5 bands
Frequency
–
+
0
–
+
0
Frequency
EQ Low EQ High
Frequency
Gain
Frequency
Gain
Frequency
–
+
0
Frequency
Gain
Frequency